Morgan Rushworth APHS-NEO CNC 3100 200T CNC Hydraulic Sheet Metal Press Brake
The new Morgan Rushworth APHS-NEO CNC hydraulic press brakes feature the latest energy saving hydraulic systems and an advanced frame design. The benefits of the new hydraulic system include 100% energy saving when at top dead centre, 45% saving during bending and 50% saving during beam return, as well as quiet working mode, precise axis positioning and faster working speeds. The new frame design allows full bending width between the frames; sheets can be bent at any position, at full width capacity and without the limitations of throat depth. The APHS-NEO hydraulic CNC press brakes are fitted with the Delem DA-66T 2D Graphical Touchscreen Controller which is a very user friendly and intuitive programming unit.
MODEL | APHS-NEO CNC 3100/200 | |
Bending Power | Tonne | 200 |
Bending Length | mm | 3150 |
Dist Between Frames | mm | 3150 |
Y Rapid Speed | mm/sec | 200 |
Y Working Speed | mm/sec | 10 |
Y Return Speed | mm/sec | 200 |
Travel In X Axis | mm | 1000 |
Speed Of X Axis | mm/sec | 330 |
Travel In R Axis | mm | 160 |
Speed Of R Axis | mm/sec | 240 |
No of Backgauge Fingers | Amount | 2 |
Number Of Sheet Support Arms |
Amount | 2 |
Oil Capacity | Li. | 420 |
Motor Power | kw | 2 x 11.0 |
Stroke | mm | 400 |
Daylight | mm | 625 |
Throat Depth | mm | 320 |
Table Height | mm | 950 |
Table Width | mm | 90 |
Length | mm | 3850 |
Width | mm | 1600 |
Height | mm | 2905 |
Weight | kg | 16000 |
Features
- Advanced energy saving hydraulic system with quiet working mode and highly precise axis positioning
- 100% energy saving at top dead centre, 45% energy saving during bending and 50% energy saving during beam return
- Increased life of hydraulic oil
- New frame design with full width bending between frames
- Multi axis Delem DA-66T 2D Graphical Touchscreen Control
- Full synchronisation of Y1 + Y2 axes with constant monitoring by CNC system to +/- 0.01mm accuracy
- High precision linear scales for measurement of stroke depth mounted on side frames rather than top beam to prevent any distortion in accuracy as beam comes under load
- CNC-controlled X + R axis ballscrew backgauge with servo drive motors and 2 micrometric backgauge finger-stops with lateral adjustment
- Steel mono-block construction with long stroke and large open height dimensions
- Polished chrome plated and ground cylinders
- Extremely high approach and return speeds for production bending
- Euro style quick release top tool holders with intermediaries including wedges for crowning
- 88 degree sectionalised goose neck top tool
- 4 way sectionalised multi vee bottom tool
- Narrow table design
- CNC motorised anti-deflection device
- 2 sliding front support arms with brush tables fitted to linear guide rails for lateral adjustment and with hand wheel for height adjustment, 1000mm long from centre of bottom tool vee
- Double footswitch control
- Independent CNC control console
- AKAS laser tooling guards
- Electrically interlocked side guards and rear access door
Options
- Delem DA69T 3D graphical touchscreen CNC control
- Independant 6 axis tower type backgauge system (X1 + R1 + Z1, X2 + R2 + Z2)
- Wila top and bottom hydraulic tool clamping
- Additional sliding front support arms
- Sheet follower support arms controlled by the CNC
- Parking area for sheet follower support arms – one per side
- Laser Angle Measuring System
You may also like…
Request A Quote
Or Print this page to save a copy