The Morgan Rushworth HST 95 Steelworker is a versatile, powerful machine designed to tackle heavy-duty metalworking tasks. With its 95 tons of force, dual ram design, and three working stations, it’s an ideal choice for businesses needing reliable punching, shearing, and notching capabilities. Here’s everything you need to know about setting up and operating the HST 95.
Overview of the HST 95
The HST 95 comes with:
- 95 tons of punching force
- Two rams for simultaneous operation, allowing the punch, shearing, and notching stations to be used independently.
- Three stations:
- Punching Station
- Shearing Station
- Notching Station
This machine allows full control over punch depth, return height, blade descent, and ascent, making it highly adaptable for various materials and tasks.
Step 1: Powering Up the Machine
After unwrapping the machine, plug it in and power it up:
- Turn on the main switch; a white light will illuminate to confirm power.
- Press the green button to start the hydraulics.
- Use the red button to stop the hydraulics as needed.
The HST 95 is equipped with three emergency stop buttons—one on the control panel and one on each foot pedal.
Step 2: Troubleshooting Phase Rotation
If you turn on the machine and press the foot pedal, but the punch head, notching, or shearing station does not activate, check the phase rotation:
- Turn off the machine.
- Unlock and remove the motor cover.
- Check the motor fan rotation; it should match the arrow direction on the motor cover.
Correct phase rotation ensures that each station operates smoothly.
Step 3: Setting Up the Punch, Shear, and Notch Stations
The HST 95 has three primary control switches:
- Punch Head: Set to working or adjustment mode.
- Shearing Station: Choose between working mode or auto-cut mode.
- Punching Station Lights: Control the work area lighting.
When in adjustment mode for the punch head, you can align the punch and die without engaging the machine. For the shearing station, working mode allows precise cuts, with the machine returning automatically to the pre-set depth stop. The auto-cut mode enables you to push the material to a back gauge, which triggers cutting and retraction automatically—no foot pedal required.
Step 4: Accessing the User Manual and Support
The HST 95’s operations manual can be found in the machine’s electrical cabinet. For additional help, the manual is available for free download on our website. Our service team is also ready to assist you through any of the contact channels shown on screen or in the comments section.
This guide ensures you’re fully equipped to set up and operate the Morgan Rushworth HST 95 Steelworker effectively. For further support, reach out to Selmach Machinery’s knowledgeable service team.
Published 12th November 2024