Almi AL150HS Abrasive Tube Notching Machine 415v
The new AL150HS has a belt speed of 45 m/s due to its unique transmission. When you open the rear cover, you can also use the pipe grinder as a belt sander, ideal for deburring cut profiles. The AL150HS has the option of being operated by means of two handwheels or by means of a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the slide with rotatable clamp are infinitely adjustable. This allows all pipe profiles to be ground at any desired angle from 20° to 90°. The AL150HS grinds square, rectangular and round pipes with different wall thicknesses and is suitable for all common material types. It is now even easier to adjust the grinding belt with the supplied hex wrench. The grinding belt can be quickly tensioned and grinding rollers can be changed in just a few seconds.
Thanks to new developments, ALMI has been able to achieve a grinding speed of 45 m/s with the updated AL150HS. As a result, the sanding belt has a longer service life, and faster grinding results in less heat in the material, resulting in less discolouration and fine dust. We also offer a range of abrasive belts to suit.













| Model | AL150HS | |
| Capacity | Ø | 20 – 114.3 |
| Belt Speed | m/s / rpm | 45 / 4300 |
| Grinding angle | º | 20 – 90 |
| Belt Size | mm | 150 x 2000 |
| Operation | Lever and handwheel | |
| Motor | kW | 4.0 |
| Length | mm | 1450 |
| Width | mm | 900 |
| Height | mm | 1260 |
| Weight | kg | 275 |
Features
- Stable and accurate working
- Fast and almost heat-free grinding of stainless steel
- No grinding frames and discoloration of the material
- Grinding rolls that can be exchanged quickly without tools
- Quick change of grinding belts
- Handy deburring by means of a deburring table
- Left-handed and right-handed use
- Cutting out any desired material
- Lever or Handwheel operation
- Grind any angle between 20º-90º
Options
- Length stop
- Dust extraction system
Related Case Studies

6IX Process Design Ltd uprate their machinery with Selmach
14th September 2022 by Dave Hargest
6IX Process Design Ltd, based in Somerset, are manufactures of stainless steel tanks, vessels and processing systems for the brewing and dairy industries. We spoke to Sam Cabell, Managing Director.. More

MR Industrial Services continued success with the help of Selmach Machinery
6th September 2022 by Dave Hargest
MR Industrial Services, based in Corby, Northamptonshire supply a range of architectural and industrial steelwork to the construction industry. We spoke to Carl Peters, Martyn Nimmo and William Adams to.. More
Frequently Asked Questions
What makes the Almi AL150HS different from the AL150U?
The AL150HS is a higher-speed 150mm-belt tube notcher with a published belt speed of 45m/s. It also allows the rear-cover area to be used for belt-sanding and deburring suitable cut profiles.
What is the maximum tube diameter for the AL150HS?
Selmach lists an outside-diameter range of 20–114.3mm for the AL150HS. Choose the matching grinding roller and confirm that the section, material and wall thickness are appropriate for the application.
What angles can the AL150HS grind?
The AL150HS can be adjusted for grinding angles from 20 to 90 degrees according to Selmach’s specification. Its adjustable cross support and rotatable clamp help set the required tube-joint geometry.
How fast does the AL150HS abrasive belt run?
Selmach lists a belt speed of 45m/s, equivalent to the published 4300rpm machine speed. This is higher than the 30m/s belt speed listed for the AL150U.
What belt and motor specifications does the AL150HS have?
The AL150HS uses a 150 x 2000mm abrasive belt and a 4.0kW motor. The product is listed as a 415V machine; verify the nameplate and site power supply before installation.
Can the AL150HS be operated by lever or handwheel?
Yes. Selmach describes both lever and handwheel operation as available on the AL150HS, allowing the operator to select the appropriate feed method for the setup.
Can the AL150HS also be used as a belt sander?
Yes. Selmach states that opening the rear cover allows use of the pipe grinder as a belt sander for deburring cut profiles. Follow the manufacturer’s safety instructions, including permitted operating configurations and guarding.
How can Selmach help maintain an AL150HS tube notcher?
Inspect belts, rollers, clamps, controls, guards and dust extraction according to the manufacturer’s schedule. Selmach can advise on abrasives and parts and confirm what servicing or Service Plan options are available for this model.





