Piranha PII-88 Dual Operator Steelworker
Piranha PII-88 Dual Operator Steelworker gives metal fabricators outstanding quality and innovative features. Every Piranha provides quality work, saving time in set up, adaptability and versatility through a wide range of tooling, and factory engineering support. The Piranha Single Operator range are capable of performing most applications. However, when two simultaneous operations are required (e.g. punching and notching) a dual operator steelworker fits the bill.
Request a Quote
|Platen Table Size (D-W)||mm||280 x 1000|
|Punch HoleSize (Max. Material)Max. Hole Size (Material)||kNmmmm||78026 (25)127 (5)|
| 6010 Long20 x 20015 x 300|
6 x 610
|Angle Shear **w/special blade||mmmm||125 x 125 x 10**100 x 100 x 13|
|Bar ShearRound (Min. – Max.)Square (Min. – Max.)||mmmm||6 – 3813 – 35|
|Coper-Notcher||kNmm||50070 x 100 x 10|
|Bending Attach. (std.)Optional Length||mm||Optional|
600, 915, 1220
|Punch EndStrokes Per MinuteOptional Speed-Up Kit||mm||19 @ 25NA|
|Work Station Height (approx.)||mm||1041|
|HydraulicsPump LPMSystem R/V bar||28241|
|Motor – Optional Phase & Voltage|
|Dimensions||mm||965 x 2286 x 1829|
- Punch Station
The urethane strippers keep the material flat to ensure a better quality punch. The shorter stroke ensures faster productivity and with no adjustments required results in an efficient and easy to use production.
- Shearing Station
The urethane hold-downs clamp and unclamp the material automatically with each stroke ensuring faster productivity. Unlike other conventional steelworkers the parts remain clamped during the entire shearing cycle to ensure a more accurate result. The complete clamping cycle promotes longer blade life making it much more cost effective.
- Shearing Visibility
Much easier to line up a cut line to the shear blade as the operator has a direct line of sight.
- Shear Blade
The low rake angle shear blade results in flatter parts being produced at a better quality. Piranha provide four shear edges on each blade to enhance cost efficiency and blade longevity.
- Angle Shear
The floating upper blade seats in the centre of the angle eliminating distortion ensuring the cut piece does not deform.
- Coper Notch
The low rake angle blade keeps the part flat and under control during notching process.
- Bending Attachment
The open ended attachment allows the angle to bent easily.
- Installing the Attachment
The dovetail slide makes the bending attachment easy to install.
- Ease of Use
All attachments and stations are at the same height making it easier to use. No need to adjsut the feed table height between stations.
- Pipe/Tube Bending Attachment
- Channel Die Block
- Bending Attachments – Optional sizes range from 300 – 1120mm
- 28XX Punch Attachment
- Press Brake Tooling Holders
- Quick set Gauging Tables – Fast set-up for punching multiple holes. Includes plate & angle-gauging guide bars. With left and right hand extensions available in 1.5m and 3m lengths.
- Channel Shear
- Bar Bender – Up to 65mm depending on available tonnage with adjustable die for different radii.
- Mechanical Backgauges
- Electrical Backgauges
- 38mm Oversize Punch Attachment
- Roller Feed Tables
Alloys, the quest to make good materials even better
19th November 2018 by Clare Harris
Alloys, in their most basic form are mixtures; mixtures of different metals or even metals and other elements, with the.. More
How to measure sheet metal gauge and thickness
15th October 2018 by Clare Harris
It might be obvious to some, but also less obvious to others… More and more these days’ fabricators take delivery.. More
Meet the machines: The Morgan Rushworth Hydraulic Steelworker
10th October 2018 by Clare Harris
This week we turn our attention towards two of the line-ups that form a major part of our comprehensive hydraulic steelworker.. More
The Promotech PRO-60 HP Hydraulic Portable Punching Machine
14th June 2018 by Clare Harris
If you are working with large beams or heavy metals, transporting them to your fixed steelworkers and punching machines can.. More
Get some predator power with a fearsome Piranha Steelworker
15th May 2018 by Clare Harris
Are you looking for a machine with a bit of an attitude? Then you’ll want to consider the Piranha. A.. More
5 things to consider when purchasing a steelworker
23rd February 2018 by Clare Harris
You might be thinking about expanding your business, starting up, or replacing an old piece of equipment. The thing is,.. More
HSP CNC Punch vs. the Traditional Steelworker
19th April 2017 by Clare Harris
When the first hydraulic steelworkers became available, they were a blessing to an industry that did a lot more than.. More
How to Safely Remove and Install A Punch & Die on a Morgan Rushworth Steelworker
21st July 2017 by Clare Harris
HSP CNC Punch Vs Traditional Steelworker
3rd April 2017 by Clare Harris
How to Readjust the Stroke Limit Switches on a Steelworker FAQ
28th June 2016 by Rather Inventive Support
How to Adjust the Material Clamping System on a Steelworker FAQ
15th June 2016 by Rather Inventive Support