Morgan Rushworth PBXS CNC 6100 380T Hydraulic Pressbrake

The Morgan Rushworth PBXS CNC hydraulic pressbrakes are fitted with the new ESA S 560 Touch Multi axis controller which is a very user friendly and intuitive programming unit. While data input into the S 560 Touch is very rapid, there is also the option of preparing the production off line on a PC with the software provided, enabling feasibility checks prior to production. Multi bend operations with complex forms can therefore be effectivel managed reducing operator error and over bending . All axes are fully synchronised and accurate 0.01mm utilising proportional valve technology. Monoblock welded steel frame ensures minimum deflection under maximum load. The PBXS CNC range spans from 1250mm x 40T machines up to 8100mm x100T models. A comprehensive range of options including anti deflection tables available to fully ‘tailor’ machines to customer requirements.

Request a Quote





Your Name *

Email *

Postcode *

Company Name *

Telephone No. *

Your Message

Tick to join our mailing list and receive special offers, machinery and industry news articles. You can unsubscribe at any time.

 

Your information will be held according to our privacy policy.

MODELPBXS CNC 6100/380
Bending PowerTonne380
Bending Lengthmm6100
Dist Between Columnsmm5100
Y Rapid Speedmm/sec90
Y Working Speedmm/sec8
Y Return Speedmm/sec70
Travel In X Axismm1000
Speed Of X Axismm/sec330
Travel In R Axis (Optional)mm160
Speed Of R Axis (Optional)mm/sec240
No of Backgauge FingersAmount2
Number Of Sheet
Support Arms
Amount2
Oil CapacityLi.450
Motor Powerkw30
Strokemm320
Daylightmm570
Throat Depthmm500
Table Heightmm1100
Table Widthmm240
Lengthmm6850
Widthmm2210
Heightmm3255
Weightkg35000
  • ESA S 560 2D Touch Controller
  • Full synchronisation of Y1 + Y2 axes with proportional hydraulic valve system and constant monitoring by CNC system to +/- 0.01mm accuracy
  • High precision linear scales for measurement of stroke depth mounted on side frames rather than top beam to prevent any distortion in accuracy as beam comes under load
  • CNC-controlled X axis ballscrew backgauge with servo drive motors
  • 2 micrometric backgauge finger-stops with lateral adjustment
  • Steel mono-block construction
  • Polished chrome plated and ground cylinders
  • Long  stroke and large open height dimensions
  • High approach and return speeds for production bending
  • Euro style quick release top tool holders with intermediaries including wedges for crowning
  • 88 degree sectionalised goose neck top tool
  • 4 way sectionalised multi vee bottom tool
  • 2 sliding front support arms with linear guide rails for lateral adjustment and hand wheel for height adjustment, 1000mm long from centre of bottom tool vee
  • Double footswitch control and pendant type control arm
  • AKAS laser tooling guards
  • Electrically interlocked side guards
  • Electrically interlocked read access door
  • Cybelec ModEva 12S 3D graphical CNC control
  • Cybelec ModEva 15S 3D graphical CNC control
  • Cybelec ModEva 15S 3D graphical touchscreen CNC control
  • Delem DA66W 2D graphical CNC control
  • Delem DA66T 2D graphical touchscreen CNC control
  • Delem DA69W 3D graphical CNC control
  • Delem DA69T 3D graphical touchscreen CNC control
  • X1 + X2, R or R1 + R2, Z or Z1 + Z2 axes
  • Additional Back Gauge Finger X Axis Backgauge
  • Additional Back Gauge Finger X, R Axis Backgauge
  • Quick Release Tool Clamps
  • Mechanical anti deflection table
  • CNC motorized anti deflection table
  • Brush table for front support arms
  • Additional sliding front support arms
  • Sheet follower support arms controlled by the CNC
  • Parking area for sheet follower support arms – one per side
  • Laser Angle Measuring System

More news like this

Visit the knowledge base

View all case studies

Request a Quote





Your Name *

Email *

Postcode *

Company Name *

Telephone No. *

Your Message

Tick to join our mailing list and receive special offers, machinery and industry news articles. You can unsubscribe at any time.

 

Your information will be held according to our privacy policy.

Or Print this page to save a copy