Morgan Rushworth HST 175 Hydraulic Steelworker 415V

The Morgan Rushworth HST hydraulic steelworkers supplied with standard tooling including repetition support tables at punch, shear and the notch stations. All five work stations are equipped with easily adjustable hold downs to safely control each operation. Comprehensive safety guards are fitted as standard on all work stations. The HST range are twin operator machines with the hydraulic system activated by two shielded foot controls, one operating the punch and the cylinder, the other operating the shear and cylinder. The system gives accurate power inching to all five work stations and allows the machine to be stopped at any position giving safe accurate tool setting and work positioning. A 1m auto crop ruled length stop and a removable halogen lamp are supplied as standard with all HST machines. Selmach Machinery has two models of steelworkers which range from 60 to 175 tonnes. Our HST machines are twin operated machines providing power and accuracy whilst our HSW provide single food pedal operation and are designed with volume, production and efficiency in mind.

Request a Quote





Your Name *

Email *

Postcode *

Company Name *

Telephone No. *

Your Message

Tick to join our mailing list and receive special offers, machinery and industry news articles. You can unsubscribe at any time.

 

Your information will be held according to our privacy policy.

Morgan Rushworth HST 175 Hydraulic Steelworker 415V imageMorgan Rushworth HST 175 Hydraulic Steelworker 415V image
Punching: Diameter x Maximum Thickness40 x 32mm
Punching: Maximum Diameter x Thickness57 x 22mm
Stroke Length:80mm
Throat Depth:625mm
Largest Hole Diameter Standard:57mm
Largest Hole Diameter – Optional:225mm
Shearing Flat Bar – Width x Maximum Thickness:380 x 30mm
Shearing Flat Bar – Maximum Width x Thickness:600 x 20mm
Shearing – Angle Flange Trim (Max 45 Degrees):120 x 15mm
Angle Cutting – 90 Degrees:200 x 20mm
Angle Cutting – 45 Degrees:80 x 10mm
Section Cutting – Round/Square:65 / 55mm
Section Cutting – Channel/Beam – (Optional):300 x 125mm
Section Cutting – Tee (Optional):150 x 15mm
Notching – Material Thickness:16mm
Notching – Width:60mm
Notching – Depth:100mm
Notching/Vee – Depth:80mm
Optional Tube Notcher:> 165mm
Optional Bar Bending Unit:250 x 25mm
Optional Sheet Bending Unit:700 x 4mm
Optional Punch At Notch Station – Throat Depth:125mm
Maximum Capacity – Diameter x Thickness:38 x 13mm
Motor: Kw11 Kw
Nett Weight: Kg6000 Kg
Length:2730mm
Width:1120mm
Height:2160mm

Hydraulic steelworkers provide a range of stations with allow for:

  • PUNCH STATIONThe standard punch station enables punching holes with a diameter of up to 38mm. The stroke is fully adjustable.
  • ANGLE STATIONAngle iron can be cut at 90¡ and 45¡ with either internal or external mitres.3
  • SECTION CUTTING STATIONCropping of round and square bar is easily performed with the standard blades. Optional blades and hold downs are available to crop special profiles.5
  • SHEARING STATIONThick and thin material can be sheared without the need for blade gap or cutting-angle adjustments. This station also allows flange cutting of angle profiles.
  • Full stroke adjustment
  • Punch table guides
  • Lower power inching
  • Punch table with multipurpose bolster – removable table block for over hang channel/joist flange punching
  • CE conformity including safety guarding
  • Low maintenance
  • Halogen light on magnetic base
  • 5 punches and dies up to 38mm
  • foot pedal control
  • Overload relief on hydraulic and electrical system
  • Swing away punch stripper unit
  • Easy change punch holder
  • Work station guard
  • Compact

Request a Quote





Your Name *

Email *

Postcode *

Company Name *

Telephone No. *

Your Message

Tick to join our mailing list and receive special offers, machinery and industry news articles. You can unsubscribe at any time.

 

Your information will be held according to our privacy policy.