Morgan Rushworth HSW 45 Hydraulic Steelworker 415V

The Morgan Rushworth HSW 45 and HSW 60 are compact universal hydraulic steelworkers with 5 work stations and have been designed for volume production with maximum efficiency. Punching, shearing, cropping, notching can be instantly carried out by pressing the movable foot pedal. The low power inch mode on each work station enables correct workpiece positioning and tool alignment. The machines are supplied with a centralised lubrication system ensuring a easy, simple maintenance programme. Adjustable hold downs are situated on all work stations to ensure safe accurate processing of material. A 1m ruled length stop is supplied as standard equipment. Selmach Machinery has two models of steelworkers which range from 60 to 175 tonnes. Our HST machines are twin operated machines providing power and accuracy whilst our HSW provide single food pedal operation and are designed with volume, production and efficiency in mind.

Request a Quote





Your Name *

Email *

Postcode *

Company Name *

Telephone No. *

Your Message

Morgan Rushworth HSW 45 Hydraulic SteelworkerMorgan Rushworth HSW 45 Hydraulic Steelworker
Close up of Angle StationClose up of Angle Station
Close up of Notching StationClose up of Notching Station
Close up of Shearing StationClose up of Shearing Station
Close up of Angle StationClose up of Angle Station
Close up of Section Cutting StationClose up of Section Cutting Station
Close up of Punch StationClose up of Punch Station
Making machinery since 1872Making machinery since 1872
Punching: Diameter x Maximum Thickness22 x 15mm
Punching: Maximum Diameter x Thickness38 x 8mm
Stroke Length:50mm
Throat Depth:175mm
Largest Hole Diameter Standard:38mm
Largest Hole Diameter – Optional:110mm
Shearing Flat Bar – Width x Maximum Thickness:200 x 15mm
Shearing Flat Bar – Maximum Width x Thickness:300 x 12mm
Shearing – Angle Flange Trim (Max 45 Degrees):80 x 10mm
Angle Cutting – 90 Degrees:100 x 10mm
Angle Cutting – 45 Degrees:70 x 6mm
Section Cutting – Round/Square:30 / 25mm
Section Cutting – Channel/Beam – (Optional):80 x 45mm
Section Cutting – Tee (Optional):40 x 5mm
Notching – Material Thickness:8mm
Notching – Width:35mm
Notching – Depth:75mm
Notching/Vee – Depth:60mm
Optional Tube Notcher:> 60mm
Optional Bar Bending Unit:100 x 12mm
Optional Punch At Notch Station – Throat Depth:85mm
Maximum Capacity – Diameter x Thickness:18 x 12mm
Motor: Kw4 Kw
Nett Weight: Kg1180 Kg
Length:1450mm
Width:590mm
Height:1620mm

Hydraulic steelworkers provide a range of stations with allow for:

  • PUNCH STATIONThe standard punch station enables punching holes with a diameter of up to 38mm. The stroke is fully adjustable.
  • ANGLE STATIONAngle iron can be cut at 90¡ and 45¡ with either internal or external mitres.3
  • SECTION CUTTING STATIONCropping of round and square bar is easily performed with the standard blades. Optional blades and hold downs are available to crop special profiles.5
  • SHEARING STATIONThick and thin material can be sheared without the need for blade gap or cutting-angle adjustments. This station also allows flange cutting of angle profiles.
  • Full stroke adjustment
  • Punch table guides
  • Lower power inching
  • Punch table with multipurpose bolster – removable table block for over hang channel/joist flange punching
  • CE conformity including safety guarding
  • Low maintenance
  • Halogen light on magnetic base
  • 5 punches and dies up to 38mm
  • foot pedal control
  • Overload relief on hydraulic and electrical system
  • Swing away punch stripper unit
  • Easy change punch holder
  • Work station guard
  • Compact

Request a Quote





Your Name *

Email *

Postcode *

Company Name *

Telephone No. *

Your Message

product_type