Morgan Rushworth HST 95 Hydraulic Steelworker 415V

The Morgan Rushworth HST hydraulic steelworkers supplied with standard tooling including repetition support tables at punch, shear and the notch stations. All five work stations are equipped with easily adjustable hold downs to safely control each operation. Comprehensive safety guards are fitted as standard on all work stations. The HST range are twin operator machines with the hydraulic system activated by two shielded foot controls, one operating the punch and the cylinder, the other operating the shear and cylinder. The system gives accurate power inching to all five work stations and allows the machine to be stopped at any position giving safe accurate tool setting and work positioning. A 1m auto crop ruled length stop and a removable halogen lamp are supplied as standard with all HST machines. Selmach Machinery has two models of steelworkers which range from 60 to 175 tonnes. Our HST machines are twin operated machines providing power and accuracy whilst our HSW provide single food pedal operation and are designed with volume, production and efficiency in mind.

Request a Quote





Your Name *

Email *

Postcode *

Company Name *

Telephone No. *

Your Message

Morgan Rushworth HST 95 Hydraulic SteelworkerMorgan Rushworth HST 95 Hydraulic Steelworker
Close up of the Auto Crop Ruled Length StopClose up of the Auto Crop Ruled Length Stop
Close up of the Notching StationClose up of the Notching Station
Cose up of the Shearing StationCose up of the Shearing Station
Close up of the Section Cutting StationClose up of the Section Cutting Station
Close up of the Angle StationClose up of the Angle Station
Close up of the Punching StationClose up of the Punching Station
Making machinery since 1872Making machinery since 1872
Punching: Diameter x Maximum Thickness33 x 20mm
Punching: Maximum Diameter x Thickness57 x 12mm
Stroke Length:80mm
Throat Depth:355mm
Largest Hole Diameter Standard:57mm
Largest Hole Diameter – Optional:160mm
Shearing Flat Bar – Width x Maximum Thickness:380 x 20mm
Shearing Flat Bar – Maximum Width x Thickness:480 x 15mm
Shearing – Angle Flange Trim (Max 45 Degrees):120 x 15mm
Angle Cutting – 90 Degrees:150 x 15mm
Angle Cutting – 45 Degrees:80 x 8mm
Section Cutting – Round/Square:50mm
Section Cutting – Channel/Beam – (Optional):160 x 74mm
Section Cutting – Tee (Optional):100 x 11mm
Notching – Material Thickness:13mm
Notching – Width:52mm
Notching – Depth:100mm
Notching/Vee – Depth:70mm
Optional Tube Notcher:> 108mm
Optional Bar Bending Unit:250 x 20mm
Optional Sheet Bending Unit:500 x 3mm
Optional Punch At Notch Station – Throat Depth:125mm
Maximum Capacity – Diameter x Thickness:38 x 10mm
Motor: Kw7.5 Kw
Nett Weight: Kg2430 Kg
Length:1920mm
Width:790mm
Height:1910mm

Hydraulic steelworkers provide a range of stations with allow for:

  • PUNCH STATIONThe standard punch station enables punching holes with a diameter of up to 38mm. The stroke is fully adjustable.
  • ANGLE STATIONAngle iron can be cut at 90¡ and 45¡ with either internal or external mitres.3
  • SECTION CUTTING STATIONCropping of round and square bar is easily performed with the standard blades. Optional blades and hold downs are available to crop special profiles.5
  • SHEARING STATIONThick and thin material can be sheared without the need for blade gap or cutting-angle adjustments. This station also allows flange cutting of angle profiles.
  • Full stroke adjustment
  • Punch table guides
  • Lower power inching
  • Punch table with multipurpose bolster – removable table block for over hang channel/joist flange punching
  • CE conformity including safety guarding
  • Low maintenance
  • Halogen light on magnetic base
  • 5 punches and dies up to 38mm
  • foot pedal control
  • Overload relief on hydraulic and electrical system
  • Swing away punch stripper unit
  • Easy change punch holder
  • Work station guard
  • Compact

Request a Quote





Your Name *

Email *

Postcode *

Company Name *

Telephone No. *

Your Message

product_type